Product and Safety Information

This page contains information regarding the manufacturer, identification, intended use, care and safety of products sold through AREP.RO, in accordance with Regulation (EU) 2023/988 on general product safety.

1. Manufacturer and Contact Details

Manufacturer and responsible economic operator in the European Union:

Atelier AREP S.R.L.
Tax Identification Number: 52731437
Trade Register Number: J2025080071009
Postal address: 222 Calea Griviței, Building 7, Staircase A, 6th Floor, Apartment 26, Bucharest, Romania
Email: hello@arep.ro
Telephone: +40 727 844 594
Website: www.arep.ro

This is the manufacturer’s postal contact address. To return a product, please follow the procedure described in our Returns Policy. The address to which the returned product must be sent will be provided after the return request has been registered.

2. Product Identification

Each product is identified by its name, product category, dimensions and associated product code or SKU.

This information is displayed on the product page and may also appear, where applicable, in the order confirmation, certificate of authenticity, product label or other documents accompanying the order.

Original works on MDF and original works on paper are unique products individually identified by the name and code assigned to each work.

Prints are identified by the design name, selected size and corresponding product code or SKU.

For any question, complaint or product safety enquiry, please provide the product name, product code or SKU and the order number, where available.

3. General Intended Use

AREP products are decorative objects intended for indoor use and display.

The products are not toys and are not intended for structural use, personal protection or any purpose other than the stated decorative use.

Before mounting or framing a product, inspect the product and its components. Do not use or install a product showing damage that may affect its stability or safe use.

Packaging materials are not part of the product. Remove all packaging before use and keep bags, plastic film, caps and small packaging components away from children.

4. Original Works on MDF

Description and Intended Use

Original works on MDF are wall decorations intended for display in indoor spaces. The products are made on a rigid support and may include a multidirectional mounting system that allows the orientation of the artwork to be selected and adjusted.

The dimensions, weight, technique, support and type of mounting system are stated on each product page.

Mounting and Safety Instructions

Only install the product on a stable wall that is capable of supporting its weight.

Use screws, wall plugs and other fixing elements suitable for the wall material and appropriately rated for the weight of the product. Fixings must be selected according to the type of wall, including concrete, brick, masonry, plasterboard or other materials.

If you are unsure which fixing system should be used, seek assistance from a qualified person.

Follow the mounting instructions supplied with the product. Before placing the artwork onto the mounting system, make sure that the support is firmly and securely attached to the wall.

When mounting the artwork or changing its orientation, hold the product with both hands and avoid applying excessive pressure to its edges. After changing its orientation, make sure that the artwork is fully and securely positioned on the mounting system.

Do not use the product if the mounting system, support, fixing components or panel show cracks, deformation, detachment or other damage that may affect stability.

Do not modify or drill into the mounting system and do not replace its components with incompatible parts.

Periodically check the stability of the mounting system, particularly after repositioning the artwork or carrying out work on the wall.

Care and Storage Conditions

The product is intended for indoor use only.

Avoid direct contact with water, excessive humidity, condensation, extreme temperatures, direct heat sources and open flames.

Avoid impacts, scratches, bending or excessive pressure on the surface and edges.

Use a soft, dry cloth for cleaning. Do not use abrasive products, solvents or large amounts of water.

5. Original Works on Paper

Description and Intended Use

Original works on paper are unique decorative works intended for display in indoor spaces. They are supplied unframed and may be rolled for packaging and transport, depending on their size.

Each work is identified by its individual name and product code and is accompanied, where applicable, by a certificate of authenticity.

Use and Care

Framing the artwork before display is recommended. Use a frame suitable for its dimensions and weight.

When mounting the frame on a wall, use fixing elements suitable for the wall material and rated for the combined weight of the frame and artwork. Follow the instructions supplied by the manufacturer of the frame or mounting system.

Handle the artwork with clean, dry hands. Avoid bending, folding, scratching or pressing its surface.

If the artwork was delivered rolled, unroll it carefully and allow it to flatten in a clean, dry environment. Do not attempt to flatten it by forcefully bending it in the opposite direction.

Protect the artwork against contact with water, excessive humidity, condensation and direct heat sources.

To reduce fading over time, avoid prolonged exposure to direct sunlight or strong sources of ultraviolet light.

Paper and the materials used in the artwork are combustible. Do not expose the product to open flames or intense heat sources.

Do not apply cleaning products, water, solvents or other substances directly to the surface of the artwork.

6. Prints

Description and Intended Use

AREP prints are decorative reproductions on paper intended for display in indoor spaces. They are supplied unframed and rolled in protective transport tubes.

Each print is identified by its design name, selected size and corresponding product code or SKU.

Use and Care

Framing the print before display is recommended. Use a frame suitable for its dimensions and weight.

When mounting the frame on a wall, use fixing elements suitable for the wall material and rated for the combined weight of the frame and print. Follow the instructions supplied by the manufacturer of the frame or mounting system.

Handle the print with clean, dry hands. Avoid bending, folding, scratching or pressing the printed surface.

Open the transport tube carefully and avoid using sharp objects near the print.

After removing the print from the tube, unroll it carefully and allow it to flatten in a clean, dry environment. Do not attempt to flatten it by forcefully bending it in the opposite direction.

Protect the print against contact with water, excessive humidity, condensation and direct heat sources.

To reduce fading over time, avoid prolonged exposure to direct sunlight or strong sources of ultraviolet light.

Paper is combustible. Do not expose the product to open flames or intense heat sources.

Do not apply cleaning products, water, solvents or other substances directly to the printed surface.

7. Damaged Products or Safety Incidents

If the product arrives damaged, do not mount or use it if the damage may affect its stability or safety.

If you subsequently notice damage, a fault in the mounting system or another condition that may present a risk, stop using the product and remove it safely, where this can be done without risk.

the product name;
the product code or SKU;
the order number;
a description of the issue;
clear photographs of the product and affected components;
information about the circumstances in which the issue occurred.

We will assess the situation and provide information about the recommended measures.

8. Updates to This Information

This information may be updated when new products or mounting systems are introduced, when product characteristics change or when relevant legal requirements are amended.

Last updated: 26 August 2026.